車輛工程系 雷射加工實驗室
指導教授
張金龍
職稱
國立屏東科技大學車輛工程系 教授
連絡電話
08-7703202轉7461
E-mail
clchang@mail.npust.edu.tw
學歷
德國斯圖佳特大學雷射研究所工學博士
國立中央大學機械工程系研究所
國立中央大學機械工程系
專長領域
雷射銲接技術、雷射深雕技術、雷射變色處理、製造熱流分析、微流道系統、空氣動力學
教學課程
工程數學、程式語言與實習、雷射材料加工、精密加工技術
期刊論文
1

Chang, C. L., Leong, J. C., Hong, T. F., Wang, Y. N., Fu, L. M., ” Experimental and Numerical Analysis of High-Resolution Injection Technique for Capillary Electrophoresis Microchip,” International Journal of Molecular Sciences,12(6), 3594-3605, 2011.(SCI; IF=1.387)

2

Chang, C. L., Wu, J. W., Lee, C. Y., ” Coloration of Stainless Steel Utilizing Fiber Laser Oxidation,” Applied Mechanics and Materials, Vol.121-126, pp.70-74, 2011. (EI)

3

Hou, H. H., Wang, Y. N., Chang, C. L., Yang, R. J., Fu, L. M., ” Rapid glucose concentration detection utilizing disposable integrated microfluidic chip,”  Microfluidics and Nanofluidics, Vol.11, Issue 4, pp.479-487, 2011. (SCI, IF=3.689)

4

Lee, C. Y., Chang, C. L., Wang, Y. N., Fu, L. M., ” Microfluidic Mixing: A Review,” International Journal of Molecular Sciences, 12(5), pp.3263-3287, 2011.(SCI; IF=1.387)

5

Fu, L. M, Lin, C. F., Chang, C. L., Chang, J. H., Tsai, C. H.,” Numerical Investigation into Thermal Analysis of Brushless Permanent Magnet Motors,” Advanced Material Research, Vol. 199-200, pp.1518-1522, 2011.(EI)

6

Leong, J. C., Chang, C. C., Chang, C. L.*, “Backlayering Effect and Spreading of Smoke in Sloped Road Tunnels with Different Cross-Sectional Geometries,” Combustion Quarterly, Vol.20, No.1, pp.46-54, 2011.

7

Chang, C. L., Ju, W. J., Liou, C. L., Leong, J.C., Fu, L. M., “Rapid Microfluidc Biochips Fabrication by Femtosecond Laser on Glass Substrate,” Key Engineering Materials, Vol.483, 2011, pp.359-363. (EI)

8

Lee, C. Y., Tai, C. H., Chang, C. L., Tsai, C. H., Wang, Y. N., Fu, L. M., “Numerical Simulation of Electromagnetic Actuator for Impedance Pumping,”  Key Engineering Materials, Vol.483, 2011, pp.305-310. (EI)

9

Lee, C. Y., Lin Liou, L. K., Chang, C. L., Tsai, C. H., Fu, L. M., “Design and Fabrication of Micro Oxygen Sensor,” Key Engineering Materials, Vol.483, 2011, pp.237-242. (EI)

10

Chang, C. L., Tseng, C. Y., Hung, S. L., Leong, J. C., “Magnetic Suppression of Cylindrical MHD Couette Flow Vortex,”IEEE 2010 International Symposium on Computer, Communication, Control and Automation Proceedings, Vol. 1, pp.81-84, 2010. (EI)

11Chang, C. L., Chang, C. C., Leong, J. C., “Planning for a Shopping Mall Fire Outbreak Egress,” Combustion Quarterly,Vol.19, No.1, pp.52-60, 2010.
12

Wang, Y. N., Leong, J. C., Chang, C. L., Tai, C. H., Tsai, C. H., Fu, L. M., Miao, J. M., “On Chip Particle Differentiation Utilizing Forward Scattering Light and Fluorescence Light with Passive Focusing,” Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009, v 1, pp. 137-142, 2010. (EI)

13

Chang, C. L., Hou, H. H., Fu, L. M., Tsai, C. H., “A low-leakage sample plug injection scheme for cross-form microfluidic CE devices incorporating a restricted cross-channel intersection,” Electrophoresis, 29, 3135-3144, 2008.(SCI; IF =3.609)

14

Lee, C. Y., Chang, C. L., Tai, C. H., Lin, C. F., Fu, L. M.,“Enhancing characteristics of gas sensors with NiO thin film,”Journal of Functional Materials and Devices, 14, 394-398,2008. (EI)

15
Lee, C. Y., Chang, C. L., Lin, C. F., Tseng, C. Y., Fu, L. M., “MEMS-based benzene gas sensor with WO3 thin film,”Journal of Functional Materials and Devices, 14, 389-393,2008. (EI)
16
Chang, C. L., Tai, C. H., Tsai, C. H., Wang Y. R., Hon, Q. S.,” Numerical Simulation of Ventilation System within Armored Vehicle Cabin,” Journal of Flow Visualization & Imaging processing, Vol.14, 1-23, 2007.(EI)
17
Leong, J. C.,  Tsai, C. H.,  Chang, C. L., Lin, C. F., Fu, L. M.,” A Rapid Microfluidic Mixers Utilizing Dispersion effect and Interactively Time-Pulsed Injection”, Japanese Journal of Applied Physics, Vol.46, issue 8, 5345-5352, 2007.(SCI, IF=1.222)
18
Tsai, C. H., Hung, M. F., Chang, C. L., Chen, L. W., Fu, L. M., ” Optimal Configuration of capillary electrophoresis microchip with expansion chamber in separation channel”,Journal of Chromatography A, 1121, 120-128, 2006. (SCI)
19Chang, C. L., Tseng, C. Y., Wang, J. P., ” A New Simplex Method Based Strategy for Automatic Multiple DOF Laser-Fiber Packaging Alignment,” Proceedings of the 2006 IEEE International Conference on Mechatronics and Automation,IEEE Xplore, posted online, 2253-2258, 2006.(EI)
20Wang, Y. N., Lin, C. F. Wu, S. T., Chang C. L., Chen, H. T., Tsai, C. H., Fu, L. M., ”Experimental Investigation of High-resolution Injection Technique in Microfluidic Chips”, Material Science Forum, Vol. 505-507, 409-414, 2006.(SCI)
21Tseng, C.-Y., Chang, C.-L., Lin, C.-F., Wang, J.-P.,”A Fuzzy Simplex Algorithm for Active Fiber-Laser Alignment”, Journal of CSME, Vol.26, No.6, 2005, pp.759-764. (EI).
22張金龍, 龔袁正, ” 表面張力效應對激光銲覆過程影響之仿真分析”, 北京科技大學學報(Journal of University of Science and Technology Beijing), Vol.28, Supplement 2, 27-30, 2006.(EI)
23張金龍, 蕭博全, ” 雙束雷射深入焊接技術於熔池變化之數值仿真分析”, 北京科技大學學報(Journal of University of Science and Technology Beijing), Vol.28, Supplement 2, 54-56, 2006,(EI)
24BRANDNER, M.; SEIBOLD, G.; CHANG, C.-L.; DAUSINGER, F.; HÜGEL, H.: Soldering with        Solid State and Diode Lasers – Energy Coupling, Temperature Rise, Process Window. Journal of Laser Applications, Vol. 12(5), October 2000, p.194-199. (SCI, EI)
25簡文通, 張金龍, 吳政霖,”雷射切割不鏽鋼粗糙度預測模式之建立,”銲接與切割, 13卷3期, Sept, 2003, p.43-51.
26Lee, C.Y., Chang, C. L., Lin, C.H., and Fu, L.M., “Numerical Analysis into the Mixing Performance of Electrokinetically Pulsatile Microfluidic Mixers,” Journal of the Chinese Society Mechanical Engineers, Accepted for Publishing, 2006. (EI)
研討會論文
1

Chang, C. L., Wu, J. W., Lee, C. Y, “Coloration of Stainless Steel Utilizing Fiber Laser Oxidation,” 2011 International Conference on Frontiers of Manufacturing and Design Science, December 11-13, Taichung, Taiwan, 179, (2011).
2

王維謙, 張瑞涵, 蕭博全, 張金龍, “輕量化車用溴化鋰水吸收式冷氣系統之研究,” 中國機械工程學會第二十三屆全國學術研討會, 2011年12月10~11日,臺灣臺中, A12-016, (2011).
3

吳峻瑋, 張金龍, “雷射雕刻技術於具曲面車輛零組件之精密製程,” 第三十五屆全國力學會議, 2011年11月18~19日,臺灣臺南, F1-023, (2011).
4

張永楠, 陳冠宇, 張金龍, “不同雷射掃描雕刻製程對薄板金屬變形之影響,” 第三十五屆全國力學會議, 2011年11月18~19日, 臺灣臺南, F1-024, (2011).
5

林永欽, 陳冠宇, 張金龍, “蝴蝶式光收發模組前端套筒之雷射銲接製程銲後位移分析,” 第三十五屆全國力學會議, 2011年11月18~19日, 臺灣臺南, G1-011, (2011).
6

林福興, 陳當賢, 張金龍, “小客車承受不同側風角度時之氣動力影響模擬分析,” 中華民國第十六屆車輛工程學術研討會, 2011年11月11日, 臺灣臺北, A1-015, (2011).
7

張永楠, 陳偉仁, 張金龍, “薄板金屬雷射雕刻製程之熱應力分析,” 中華民國第十六屆車輛工程學術研討會,2011年11月11日, 臺灣臺北, I9-011, (2011).
8

林福興, 陳當賢, 張金龍, “定向側風對裝有空氣動力套件小客車之氣動力影響模擬分析,” 2011 屏東科技大學暨北京科技大學第六屆學術交流研討會, 2011年10月12日, 臺灣屏東, F10, (2011).
9

王維謙, 張瑞涵, 蕭博全, 張金龍, “車用溴化鋰水吸收式冷氣系統原型機之開發,” 2011 屏東科技大學暨北京科技大學第六屆學術交流研討會, 2011年10月12日, 臺灣屏東, F05, (2011).
10

Chang, C. L., Tsai, M. H., Chang, Y. N., “Study of Laser Coloration Treatment for Stainless Steel using Fiber Laser,” the CSME 27 Conference Proceedings, Dec. 10-11, Taipei, Taiwan, DD02-021, 476-479, (2010).
11

Chang, C. L., Chen, K. Y., “Three-Dimensional Nemerical Simulation of Laser Welding for Aluminum Alloy Sheet with a Lip Edge,” the CSME 27 Conference Proceedings, Dec. 10-11, Taipei, Taiwan, DD02-024, 1211-1216, (2010).
12

張金龍, 何建毅, 吳峻瑋, “雷射深雕技術於車輛商標之模具開發,” 中華民國第十五屆車輛工程學術研討會,2010年11月26日, 臺灣臺南, A27, 1-6, (2010).
13

張金龍, 柯政佑, 張瑞涵, “脈衝式Nd:YAG雷射對鋁合金燃油濾清器銲接過程之熱應力影響,” 中華民國第十五屆車輛工程學術研討會, 2010年11月26日, 臺灣臺南, A28, 1-6, (2010).
14

Chang, C. L., Tsai, M. H., Chang, Y. N., “Analysis of Processing Parameters of Laser coloring Marking for Stainless Steels,” The 34th National Conference on Theoretical and Applied Mechanics, November 19-20, Yunlin, Taiwan, F1010, 1-4, (2010).
15

Ju, W. J., Wang, Y. N., Chang, C. L., Yang, R. J., Fu, L. M., “Rapid Prototyping of PMMA Microfluidic Chips Utilizing a CO2 Laser,” The 34th National Conference on Theoretical and Applied Mechanics, November 19-20, Yunlin, Taiwan, A0004, 1-8, (2010).
16

Lee, C. Y, Chiang, T. C., Chang, C. L., Chen, Y. C., Wang, Y. C., Tseng, C. Y.,” Application of Removable Air-conditioning Module to Electric Vehicles,” The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition EVS-25 Shenzhen, China, Nov. 5-9, (2010).
17

Tsai, C. H, Wang, Y. N., Tseng, C. Y., Lin, C. F., Chang, C. L.,” Numerical Investigation into Thermal Analysis of Brushless Permanent Magnet Motors,” The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition EVS-25 Shenzhen, China, Nov. 5-9, (2010).
18

Lee, C. Y., Wang, Y. N., Tsai, C. H., Tai, C. H., Chang, C. L., Fu, L. M.,” Numerical Simulation of Electromagnetic Actuator for Impedance Pumping,” The 2nd International Conference of CSMNT, Xian, China, Oct. 22-24, (2010).
19

Wang, Y. N., Leong, J. C., Chang, C. L., Tai, C. H., Tsai, C. H., Fu, L. M., Miao, J. M., “On Chip Particle Differentiation Utilizing Forward Scattering Light and Fluorescence Light with Passive Focusing,” ASME 2009, 2nd Micro/Nanoscale Heat & Mass Transfer International Conference (MNHMT09), Dec. 18-21, Shanghai, China, MNHMT2009-18298, 1-5, (2009).
20

Chang, C. L., Chang, W. S., Kuo, Y. H., “Simulation Analysis of the Weld Depth for Titanium Alloy in Laser Welding Processing,” 2009 AASRC/CCAS Joint Conference, Dec. 12, Taipei, Taiwan, H1-5, 1-6, (2009).
21

張金龍, 吳俊宜, 謝明熹, “CO2雷射退火技術應用於生物晶片微管道之製作,” OPT 2009臺灣光電科技研討會,Optics and Photonics, 2009, Dec. 11-12, Taipei, Taiwan, CO105, 1-3, (2009).
22

Chang, C. L., Chen, D. S., Chang, W. S., Lin, Y. C., “The Effect of Chamfer Shapes for Titanium Alloy Weld Workpiece on Pores Development Using Laser Welding,” the CSME 26 Conference Proceedings, Nov. 20-21, Tainan, Taiwan D02-034, 1-6, (2009).
23

Chang, C. L., Ke, C. Y., Chen, D. S., “Simulation of Thermal Stress for Laser Welding of Aluminum Alloy Fuel Filter in Different Approaches,” The 14th National Conference on Vehicle Engineering, October 30, 2009, Formosa University, Yunlin, Taiwan, R.O.C., A05, 1-6, (2009).
24

王譽程, 張緯良, 陳俊達, 張金龍, 李佳言,“一種新式微型陣列式電磁致動器製作之研究,” 2009 屏東科技大學暨北京科技大學第四屆學術交流研討會, November 6, 2009, Pingtung, Taiwan, D48-D54, (2009).
25

王譽程,張金龍,蘇于豪,洪廷甫,陳俊達,李佳言,“微型苯氣體感測器設計與製作,” 2009 屏東科技大學暨北京科技大學第四屆學術交流研討會, November 6, 2009, Pingtung, Taiwan, D60-D65, (2009).
26

Hong, T. F., Ju, W. C., Chang, C. L., Tseng, C. Y., Kuo, J. N., Fu, L. M., “Rapid Microfluidc Biochips Fabrication by Femtosecond Laser on Glass Substrate,” 11th Annual Conference of the Chinese Society of Micro-Nano Technology, Harbin, China, August 12-14, A-204, 1-4, (2009).
27

Leong, J. C., Chang, C. L., Chen, P. A., and Wang, Y. N., “Analysis of Ventilation in Sanitary Sewerpipes,” 2009 Environmental Quality Concern, Control and Conservation, Kaohsiung, Taiwan, May 22, EQC-005, (2009).
28

Chang, C. L., Hsieh, M. H., Chou, F. M., “Thermal Stress Analysis of Laser Engraving around an Area on the Stainless Steel SUS304,” The 32nd National Conference on Theoretical and Applied Mechanics, November 28-29, 2008, NCCU, Chai-Yi, Taiwan, R.O.C., J-3, 1-6, (2008).
29

Chang, C. L., Tsai, M. H., Chou, F. M., “Thermal Stress Analysis of Laser Engraving for Stainless Steel SUS304,” The 13th National Conference on Vehicle Engineering, October 31, 2008, MCUT, Taipei, Taiwan, R.O.C., E_028, 1-6, (2008).
30

Chang, C. L., Ho, C. Y., Chou, F. M., “The Effect of Thermal Stress on Laser Engraving for the Stainless Steel SUS304 with Different Procedures,” SME Taipei Chapter 2008 Annual Meeting and the 6th National Conference on Precision Manufacturing, November 8, 2008, KSU, Tainan, Taiwan, R.O.C., A01-14, 1-6, (2008).
31

Tsai, C. H., Hong, T. F., Luo, W. B., Chang, C. L., Tai, C. H., Fu, L.M., “Rapid Mcrofluidic Chip Fabrication by CO2 Laser on PMMA Substrate,” The 1st International Conference of Chinese Society of Micro/Nano Technology (CSMNT),Beijing, China, November 21~23, 2008.
32

Tsai, C. H., Lee, C. Y., Chang, C. L., Tai, C. H., Fu, L.M., ”Development of High-performance Detection Method for CE Microchips,” 5th International Symposium on Instrument Science and Technology (ISIST2008), Shenyang, China, September 15~18, 2008.
33

Chang, C. L., Kao, T. T., Ke, C. Y., ”Thermal Stress Analysis for Nd:YAG Laser Welding of Circular Solenoid Valves,” The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 2007, ISU, Kaohsiung, Taiwan, R.O.C., A-20, 1-8, (2007).
34
Chang, C. L., Wu, C. D., Wu, C. Y., ” The Effect of pulse frequency on thermal stress for Nd:YAG laser welding of solenoid valves,” The 12th National Conference on Vehicle Engineering, November 16, 2007, NPUST, Pingtung, Taiwan, VC14, 1-7, (2007)
35

梁智創, 張金龍, 吳宗育, ”隧道內會車之流場分析,” 第十二屆車輛工程學術研討會, 臺灣．屏東, 2007,VA03, 1-6, (2007).
36

Chang, C. L., Liang, J. C., Chou, F. M., ” Numerical analysis of percussion drilling using ultrashort pulse laser,” 2007 AASRC/CCAS Joint Conference, Nov. 16, Pingtung, Taiwan, A27-19, 1-7, (2007).
37
Chang, C. L., Kao, T. T., Chang, W. S., ” Post-Weld Shift of Spot Welding for TO-CAN Package using Simultaneous Multi-Beam Lasers,” 2007 AASRC/CCAS Joint Conference, Nov. 16, Pingtung, Taiwan, A27-20, 1-7, (2007).
38
Lee, C. Y., Chang, C. L., Lin, C. F., Tseng, C. Y., Fu, L.M., ” MEMS-based benzene gas sensor with WO3 thin film,” 9thAnnual Domestic Conference of Micro-Nano Technology, ShangHai, China, September 20-22, 2007.
39

Lee, C. Y., Chang, C. L., Tai, C. H., Lin, C. F., Fu, L. M., ” Enhancing characteristics of gas sensors with NiO thin film,” 9th Annual Domestic Conference of Micro-Nano Technology, ShangHai, China, September 20-22, 2007.
40

Leong, J. C., Tsai, C. H., Chang, C. L., Fu, L.M., Lin, C. H., Tai, C. H., “Rapid Formadehyde detection system in Foods,” 9th Annual Domestic Conference of Micro-Nano Technology, ShangHai, China, September 20-22, 2007.
41
Chang, C. L., Tsai, C. H., Lin, C. H., Fu, L. M., Pan, C. J. ”Rapid Circular Microfluidic Mixer,” the 30th National Conference on Theoretical and Applied Mechanics, M1-3, 1-6, (2006).
42
Chang, C. L., Chien, W. T., Chen, C. F., ” Investigating the Optimum Parameters in High Speed Milling SKD11 Mold Steel Using Gray Relational Analysis,” The 4th Conference on Precision Machinery and Manufacturing Technology—PMMT 2006, A56, 1-7, (2006).
43
Zhong, Y. M., Tsai, C. H., Lin, C. F., Chang, C. L., Fu, L. M., ”  High-resolution Analysis Technique for CE Microchip,” the 4thConference on Precision Machinery and Manufacturing Technology PMMT, B10, 1-5, (2006).
44
張金龍, 蔡建雄, 吳佳達, ” 表面張力效應對雙束雷射深入焊接熔池形狀影響之模擬分析,” 第三十屆全國力學會議, B4-4, 1-8, (2006).
45
張金龍, 高宗達, 黃性順, ” 雷射點焊對光收發模組構裝焊後固化特性之時態分析,” 第三十屆全國力學會議,A3-7, 1-6, (2006)
46
張金龍, 梁智創, 蕭博全, ” Nd：YAG 雷射於常用金屬材料鑽孔之數值模擬分析,” 中國機械工程學會第二十三屆全國學術研討會, A8-052, 1-6, (2006)
47
張金龍, 梁智創, 蔡建雄, 葉承朋, ” 機車排氣管之數值模擬分析,” 中國機械工程學會第二十三屆全國學術研討會, A2-005, 1-7, (2006)
48

張金龍, 梁智創, 潘致戎, ” 雷射錫焊過程熱傳現象之數值模擬分析,” 第十一屆車輛工程學術研討會, E3-3,1-6, (2006)
49
張金龍, 龔袁正, “表面張力效應對鐳射銲覆過程影響之模擬分析”, 2006年國立屏東科技大學－北京科技大學學術研討會, Peking, July 2- 3, M-E014.
50
楊淳盛、梁智創、張金龍, “含氣泡液體的有效黏度分析”,2006年國立屏東科技大學－北京科技大學學術研討會,Peking, July 2- 3, M-E028.
51
張金龍, 簡文通, 黃信賢, “利用田口法與灰關聯分析探討高速銑削SKD11模具鋼之最佳化參數”, 第四屆精密機械與製造技術研討會論文集－2006, D05, 1-7.
52
Chang, C. L., Chien, W. T., Chen, C. F., “ Investigating the Optimum Parameters in High Speed Milling SKD11 Mold Steel Using Gray Relational Analysis”, The 4th Conference on Precision Machinery and Manufacturing Technology—PMMT 2006, A56,1-7.
53
Tseng, C. Y., Chang, C. L., Lin, C. F., Wang, J. P., ”A Fuzzy Simplex Algorithm for Active Fiber-Laser Alignment”, Proceedings of ICAM 2005, Nov. 28- Dec. 2, Taipei, Taiwan, 2005, C-002.
54 Tai, C. H., Chang, C. L., Lin, C. F., Tsai, C. H., Lee, C. Y., Lin, C. H. Fu, L. M., “Numerical Analysis into the Mixing Performance of Electrokinetically Pulsatile Microfluidic Mixers.”, Proceedings of ICAM 2005, Nov. 28- Dec. 2, Taipei, Taiwan, 2005, H-013.
55 Chang, C. L., Chen, C. D., ” Numerical Analysis of the Characteristic of the Melt Pool in Deep Penetration Welding Using Two-beam Laser Technique”, the CSME 22 Conference Proceedings,Chung-Li, 2005, D8-003.
56 Chang, C. L., Liang, B. H., “Investigation of the Effect of Crosswind on Recreation Vehicle.“, the 10th Conference on Vehicle Engineering, Taipei, 2005, A-10.
57 Chang, C. L., Tai, C. H., Chen, G. L., Hsu, U. K., Char, J. M., ” Numerical Studies of the Joined Wing Configuration for an Aircraft”, the 12th National Computational Fluid Dynamics Conference, Kaohsiung, 2005, CFD12-0505.
58 Chang, C. L., Chien, W. T., Chen, C. D., Kung, Y. C., ”Two-Dimensional Simulation of the Effects of Marangony Flow on Laser Cladding”, the 12th National Computational Fluid Dynamics Conference, Kaohsiung, 2005, CFD12-0926.
59 Tsai, C. H., Leong, J. C., Chang, C. L., Tai, C. H., “The Asymmetric Behavior of Flame Propagation Inside Tubes,” 16th International Symposium on Transport Phenomena, Prague, ISIP-16, 2005.
60 張金龍, 簡文通, 徐大中,”建立雷射銲接SUS304不銹鋼最佳化模式之探討”,第二屆精密機械與製造技術研討會, 屏東, 2004, p.241-250.
61 蔡建雄, 戴昌賢, 張金龍, 吳賦斌, ”機車的流場分析與數值研究”,第二十八屆全國力學會議, 臺灣．台北,2004, p.530-536.
62 戴昌賢, 張金龍, 趙志燁, 洪欽山, 黃錫洲, ”高爾夫球外形對飛行影響之評估”,第二十八屆全國力學會議, 臺灣．台北, 2004, p.1899-1907.
63 張金龍, 戴昌賢, 王玉仁,”車輛超車流場之數值模擬”, 第十一屆全國計算流體力學學術研討會, 臺灣．台東,2004, CFD11-2226.
64 張金龍, 龔袁正, 方廷翔,”多焦點雷射應用於深入焊接時之融熔熱效率分析,”第二十屆機械工程研討會, 臺灣．台北, 2003, p.1335-1342.
65 張金龍,”一項新的數學模式–三維積體點熱源模式–模擬多焦點雷射深入焊接技術,”第二十七屆全國力學會議, 臺灣．台南, 2003.
66 戴昌賢, 張金龍, 蔡建雄, 王玉仁, 陳肇宏,”裝甲車輛乘員艙通風系統模擬,”
67 第八屆車輛工程學術研討會, 臺灣．台北, 2003, p.93-100.|
68 戴昌賢, 張金龍, 蔡建雄, 楊政展, 洪欽山, 林志儒, 姚俊男,”室內建築配合空調系統之流場分析,”第二十屆機械工程研討會,臺灣．台北, 2003, p.1237-1244.
69 蔡建雄, 戴昌賢, 張金龍, 吳賦斌, 張献堃,”方形管內火焰形狀的多樣性,” 第二十屆機械工程研討會, 臺灣．台北, 2003, p.49-56.
70 CHANG, C. L.: Modeling of laser deep penetration welding using multi-focus  technique. International Workshop on Stability of Laser Beam Welding. 2.- 4., Feb. 2000, Hirschegg, Germany.
71 HOHENBERGER, B.; CHANG, C. L.; SCHINZEL, C.; DAUSINGER, F.; HÜGEL, H.: Laser Welding with Nd:YAG Focus Matrix Technique. Proc. ICALEO‘99, 1999-D, p.167-176.
72 CHANG, C. L.: Ausstellungsposter: Modellierung des Lasertiefschweißens mit Mehrstrahltechnik. SLT‘99, 28.-29. Sept. 1999, Stuttgart, Germany.
73 DAUSINGER, F.; HOHENBERGER, B.; SCHINZEL, C.:CHANG, C.-L.: Laserschweißen von Aluminiumlegierungen – Ein Angebot an den Schienenfahrzeugbau. Vorträge der 3. Fachtagung “Fügen und Konstruieren im Schienenfahrzeugbau.”, 19.-20. Mai 1999, Schweißtechnische Lehr- und Versuchsanstalt Halle, Germany, p.1-7. 
74 BRANDNER, M.; SEIBOLD, G.; CHANG, C. L.; DAUSINGER, F.; HÜGEL, H.: Soldering withSolid State and Diode Lasers – Energy Coupling, Temperature Rise, Process Window, Proc. ICALEO‘99, 1999-D, p.217-222.
75 戴昌賢, 張金龍, 蔡建雄, 黃彥隆, 郭俊明, 徐友群,”車輛後導流板對車體流場之穩定性分析,”第八屆車輛工程學術研討會, 臺灣．台北, 2003, p.289-295.
76 Tseng, C. Y., Chang, C. L., Lin, C. F., Wang, J. P., ” The Study on Automation of Fiber-Laser Alignment Using Simplex Method”, 第二十一屆機械工程研討會,臺灣．高雄, 2004, p.6397-6402.
77

Wang, Y. N., Lin, C. F., Wu, S. T., Chang, C. L., Chen, H. T., Tsai, C. H., Fu, L. M., “Experimental Investigation of High-resolution Injection Technique in Microfluidic Chips.”, Proceedings of ICAM 2005, Nov. 28- Dec. 2, Taipei, Taiwan, 2005, F-009.
著作專書
1蔡建雄, 張金龍, 王耀男 譯 “熱力學(Thermodynamics, An Enginnering Approach, 6e)”,高立圖書, 2010。
2
CHANG, C.-L.: Berechnung der Schmelzbadgeometrie beim Laserstrahlschweisen mit Mehrfokustechnik. Universitat Stuttgart, Dissertation, 2000.
3
CHANG, C.-L.: Modellierung des Zweistrahl-Schweisens. Diplomarbeit, 96-23, Institut fur Strahlwerkzeuge, Universitat Stuttgart, 1996.
4

CHANG, C.-L.: Flow Visualization for the Generation and Development of Tip-Vortex , Master Thesis, National Central University, 1990.

技術報告及其他
1 CHANG, C. L.: Simulation des Lasertiefschweißens von Zweistrahltechnik bei Aluminium und Stahl durch ein Modell der integrierten beweglichen Punktquellen. Interne Mitteilung, Institut       für Strahlwerkzeuge, Universität Stuttgart, Germany, April 1997.
2 CHANG, C. L.: Modellierung der Mehrstrahltechnik bei der Materialbearbeitung mit Laserstrahlen – Schweißen, Umschmelzen und Oberflächenbehandlung. Interne Mitteilung, Institut für Strahlwerkzeuge, Universität Stuttgart, Germany, März 1998.
3 CHANG, C. L.: Simulation des Laserlötens bei Elektronenbauteile mit FEM Programm FIDAP. Interne Mitteilung, Institut für Strahlwerkzeuge, Universität Stuttgart, Germany, August 1999.
4 張金龍, 龔袁正, 方廷翔, ”多焦點雷射應用於深入焊接時之融熔熱效率分析”, 九十一年度國科會成果報告, 計畫編號: NSC 91－2212－E－020－009。
5 張金龍, 陳靖達, 梁寶鴻,”以多焦點雷射技術進行深入焊接時的融池穩定性之數值模擬分析”, 九十二年度國科會成果報告, 計畫編號: NSC 92－2212－E－020－003。
6 張金龍, 梁寶鴻, 陳靖達, ”以多焦點雷射技術應用於光收發模組構裝之焊接特性與焊後位移補償模式分析,”九十三年度國科會成果報告, 計畫編號: NSC 93－2212－E－020－003。
7 張金龍, 吳佳達, 黃性順, ” 以Nd:YAG雷射對油壓控制系統精密電磁閥進行焊接時之熱應力分析,”九十四年度國科會成果報告,計畫編號: NSC 94－2212－E－020－010。
8 張金龍, 吳佳達, 黃性順, ” 鋁合金燃油濾清器之雷射銲接封裝技術之開發,”九十五年度國科會成果報告, 計畫編號: NSC 95－2262－E－020－011-CC3。
9 張金龍, 張文碩, 柯政佑, “Nd:YAG雷射對鈦合金(Ti-6Al-4V)高爾夫球頭進行銲接封裝技術之發展”, 九十七年度國科會成果報告, 計畫編號: NSC 97－2221－E－020－009。
10 張金龍, 蔡孟宏, 何建毅, 陳當賢, 謝明熹, “以Nd:YAG雷射進行金屬幣模雷射深雕技術之開發”, 九十八年度國科會成果報告, 計畫編號: NSC98－2221－E－020－012。
11 張金龍, 陳冠宇、張永楠、吳峻瑋、張瑞涵、陳當賢、郭永涵, “光纖雷射對車輛零組件進行雷射標誌技術之發展”, 九十八年度國科會成果報告, 計畫編號: NSC99－2628－E－020－001。